Pair Fits Nissan Murano 2009 2010-2017 Front Wheel Hub Bearings Assembly W/ABS

$66.42 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location:
Ships to: US,
Item: 304758571923

状態:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … 続きを読む状態についてNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. すべての状態の定義を見る新しいウィンドウまたはタブに表示されます
Placement on Vehicle:Left, Right, Front
Manufacturer Warranty:1 Year
Interchange Part Number:513306, 513307
Preminumwheel spacer:Preminumwheel spacer
UPC:Does not apply
Cross part number:29513306,713307,40202JP11A
Finish:Polished, Rust Protected
Fitment type:Direct replacement
Flange Bolt Hole qty:4
Wheel Stud Quantity:5
Material:steel
weight:16LB
Package:2 Pcs wheel hub baring
Manufacturer Part Number:PWS802796002

eBay Specifications : – Fits LH (Driver Side) RH (Passenger Side) FRONT – Has ABS sensor with Tone Ring Sensor – Direct fit, designed for vehicle specific application on all makes and models – Latest generation design used in manufacturing our hub assemblies – High quality seal design ensures a clean, long lasting hub bearing – Sensors designed to match specific make and model – Precision machined and pre-coated with anti-corrosion lubricant – Manufactured for quick and easy installation For the following years and models: Fits Nissan Murano 2009-2017 Fits Nissan Quest 2011 Package include: Premium Best choice of motor parts Pair Fits Nissan Murano 2009 2010-2017 Front Wheel Hub Bearings Assembly W/ABS Specifications : – Fits LH (Driver Side) RH (Passenger Side) FRONT – Has ABS sensor with Tone Ring Sensor – Direct fit, designed for vehicle specific application on all makes and models – Latest generation design used in manufacturing our hub assemblies – High quality seal design ensures a clean, long lasting hub bearing – Sensors designed to match specific make and model – Precision machined and pre-coated with anti-corrosion lubricant – Manufactured for quick and easy installation For the following years and models: Fits Nissan Murano 2009-2017 Fits Nissan Quest 2011 Package include: 2 x wheel hub bearing 1 Year Warranty How to Install a Wheel Bearing Hub Assembly : 1. Park the vehicle on a flat, level paved or concrete surface. Place the vehicle in gear or park and apply the parking brake. 2. Place a wheel chock behind a rear tire (or front if you’re doing a rear hub-bearing assembly). 3. Loosen the lug nuts on the wheel of the hub bearing you’re replacing with the breaking bar and a socket; do not remove them. 4. Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand, preferably on the frame rail if present. 5. Remove the lug nuts and wheel. 6. Locate the caliper bolts and remove them with the ratchet and a socket. 7. Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord. Do not allow the caliper to dangle on the rubber brake hose. 8. Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket. You may want to break them loose with the breaking bar first if they’re really tight. On some vehicles, the brake pads will remain in the bridge and can be removed by prying out with the screwdriver. On other models, the pads stay intact and may be clipped to the caliper. If you have to remove the pads, do so by taking note how they were placed in the bridge and be sure you’re able to put them back in the same manner they were extracted. 9. Remove the rotor. If it is stuck to the hub, you may have to hit it with a large rubber mallet. Use a rubber mallet if you’re not going to replace the rotor, so you don’t damage the surface. 10. Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug. In many applications, if the ABS wire is integrated with the wheel-bearing hub assembly, a new one will come with it. If you’re not sure, check the box of the new bearing and if there’s an ABS wire, follow the wire until you locate the plug, unplug it and unclip it from its mounts. If ABS is present but not integrated with the bearing assembly, remove the sensor from the bearing with a ratchet and socket. 11. Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut. 12. Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket. The location of these can sometimes create a tight area to place a socket and tool on to remove them with. You may have to apply some ingenuity. Replace the socket on the ratchet to extract the bolts quickly and easier. Most hubs have three or four bolts. 13. Install the slide hammer onto the lug studs and secure with tightened lug nuts. This may take several attempts and a couple of breaks in between to remove the hub bearing from the knuckle. Pay close attention to your progress and try to determine when the bearing will separate. Take note of how the backing plate is installed between the knuckle and the bearing so you can replace it in the same manner. 14. Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper. Move the drive-shaft spindle around to get it out of your way. Take your time when doing this and make sure it’s as clean as possible. 15. Place the backing plate in its original position and place the new bearing onto the knuckle. Manipulate the drive-shaft spindle splines into the center of the hub bearing. Push the bearing on as far as you can, making sure to line it up correctly if ABS lines or plugs are present. 16. Replace the wheel-bearing assembly bolts. They’re pretty long, so as soon as you can thread them into the new bearing, start to tighten them. Pull the bearing in by tightening the bolts a little bit at a time and then switching to the next bolt to make sure the bearing assembly does not shift in the knuckle and cause damage. Once the bearing is drawn in flush, use the breaking bar to get the bolts as tight as you can get them. 17. Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket. 18. Replace the brakes in the same manner you extracted them. You may need to push the caliper piston in a bit with a C-clamp to get it over the rotor. Plug in the ABS lines or reattach them to the bearing, if applicable. 19. Replace the tire and lug nuts, and tighten the lug nuts as tight as you can get them. 20. Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque setting. 21. Pump the brake pedal if you had to push the caliper piston in with a C-clamp to restore hydraulic pressure to that caliper piston. 22. Remove the wheel chock, release the parking brake, and go for a test drive. Item Specifics Placement on Vehicle Left Warranty 1 Year Interchange Part Number 513306 Brand Preminumwheel spacer Cross part number 29513306,713307,40202JP11A Surface Finish Polished, Rust Protected Fitment type Direct replacement Flange Bolt Hole qty 4 Wheel Stud Quantity 5 Material steel weight 16LB Package 2 Pcs wheel hub baring Manufacturer Part Number PWS802796002 Payment We accept paypal only We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address! Shipping 1. Items will be shipped within 24 hours after getting your verified payment. 2. 2.US Storage& UNITED STATES by fast shipping. We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors. Please feel free to contact us if you haven’t receive the item after the estimated shipping time Returns 1.Defective products can be exchanged or returned for full price refund within 30 days after you receive the item. 2.Any returning or exchanging item must be in new condition and cannot be tempered. 3. Buyers are responsible to pay the return shipping fee or exchange shipping fee. 4.Please contact us by eBay email first before you return the item Every week we have new items put on sale , if the items you don’t need now ,you also cam often come to visit my store, maybe one day you can buy the items in our stores which you need. Contact Us We hightly appreciate that you can refer to us or email us before you leaving Negative feedback or Neutral feedback .We will offer help to resolve your problems as fast as possible. Premium Best choice of motor parts DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US Pair Fits Nissan Murano 2009 2010-2017 Front Wheel Hub Bearings Assembly W/ABS Specifications : – Fits LH (Driver Side) RH (Passenger Side) FRONT – Has ABS sensor with Tone Ring Sensor – Direct fit, designed for vehicle specific application on all makes and models – Latest generation design used in manufacturing our hub assemblies – High quality seal design ensures a clean, long lasting hub bearing – Sensors designed to match specific make and model – Precision machined and pre-coated with anti-corrosion lubricant – Manufactured for quick and easy installation For the following years and models: Fits Nissan Murano 2009-2017 Fits Nissan Quest 2011 Package include: 2 x wheel hub bearing 1 Year Warranty How to Install a Wheel Bearing Hub Assembly : 1. Park the vehicle on a flat, level paved or concrete surface. Place the vehicle in gear or park and apply the parking brake. 2. Place a wheel chock behind a rear tire (or front if you’re doing a rear hub-bearing assembly). 3. Loosen the lug nuts on the wheel of the hub bearing you’re replacing with the breaking bar and a socket; do not remove them. 4. Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand, preferably on the frame rail if present. 5. Remove the lug nuts and wheel. 6. Locate the caliper bolts and remove them with the ratchet and a socket. 7. Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord. Do not allow the caliper to dangle on the rubber brake hose. 8. Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket. You may want to break them loose with the breaking bar first if they’re really tight. On some vehicles, the brake pads will remain in the bridge and can be removed by prying out with the screwdriver. On other models, the pads stay intact and may be clipped to the caliper. If you have to remove the pads, do so by taking note how they were placed in the bridge and be sure you’re able to put them back in the same manner they were extracted. 9. Remove the rotor. If it is stuck to the hub, you may have to hit it with a large rubber mallet. Use a rubber mallet if you’re not going to replace the rotor, so you don’t damage the surface. 10. Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug. In many applications, if the ABS wire is integrated with the wheel-bearing hub assembly, a new one will come with it. If you’re not sure, check the box of the new bearing and if there’s an ABS wire, follow the wire until you locate the plug, unplug it and unclip it from its mounts. If ABS is present but not integrated with the bearing assembly, remove the sensor from the bearing with a ratchet and socket. 11. Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut. 12. Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket. The location of these can sometimes create a tight area to place a socket and tool on to remove them with. You may have to apply some ingenuity. Replace the socket on the ratchet to extract the bolts quickly and easier. Most hubs have three or four bolts. 13. Install the slide hammer onto the lug studs and secure with tightened lug nuts. This may take several attempts and a couple of breaks in between to remove the hub bearing from the knuckle. Pay close attention to your progress and try to determine when the bearing will separate. Take note of how the backing plate is installed between the knuckle and the bearing so you can replace it in the same manner. 14. Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper. Move the drive-shaft spindle around to get it out of your way. Take your time when doing this and make sure it’s as clean as possible. 15. Place the backing plate in its original position and place the new bearing onto the knuckle. Manipulate the drive-shaft spindle splines into the center of the hub bearing. Push the bearing on as far as you can, making sure to line it up correctly if ABS lines or plugs are present. 16. Replace the wheel-bearing assembly bolts. They’re pretty long, so as soon as you can thread them into the new bearing, start to tighten them. Pull the bearing in by tightening the bolts a little bit at a time and then switching to the next bolt to make sure the bearing assembly does not shift in the knuckle and cause damage. Once the bearing is drawn in flush, use the breaking bar to get the bolts as tight as you can get them. 17. Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket. 18. Replace the brakes in the same manner you extracted them. You may need to push the caliper piston in a bit with a C-clamp to get it over the rotor. Plug in the ABS lines or reattach them to the bearing, if applicable. 19. Replace the tire and lug nuts, and tighten the lug nuts as tight as you can get them. 20. Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque setting. 21. Pump the brake pedal if you had to push the caliper piston in with a C-clamp to restore hydraulic pressure to that caliper piston. 22. Remove the wheel chock, release the parking brake, and go for a test drive. Item Specifics Placement on Vehicle : Left Warranty : 1 Year Interchange Part Number : 513306 Brand : Preminumwheel spacer Cross part number : 29513306,713307,40202JP11A Surface Finish : Polished, Rust Protected Fitment type : Direct replacement Flange Bolt Hole qty : 4 Wheel Stud Quantity : 5 Material : steel weight : 16LB Package : 2 Pcs wheel hub baring Manufacturer Part Number : PWS802796002 PaymentShippingReturnsContact Us We accept paypal only We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address! 1. Items will be shipped within 24 hours after getting your verified payment. 2. 2.US Storage& UNITED STATES by fast shipping. We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors. Please feel free to contact us if you haven’t receive the item after the estimated shipping time 1.Defective products can be exchanged or returned for full price refund within 30 days after you receive the item. 2.Any returning or exchanging item must be in new condition and cannot be tempered. 3. Buyers are responsible to pay the return shipping fee or exchange shipping fee. 4.Please contact us by eBay email first before you return the item Every week we have new items put on sale , if the items you don’t need now ,you also cam often come to visit my store, maybe one day you can buy the items in our stores which you need. We hightly appreciate that you can refer to us or email us before you leaving Negative feedback or Neutral feedback .We will offer help to resolve your problems as fast as possible. All rights reserved. Shop Category Store Home wheel hub bearing wheel spacers ABS wheel speed sensor wheel lug nut Hot Item Pair Fits Nissan Rogue Select 2014-2015 Front Wheel Bearings Hub Assembly 5 Lugs USD 73.79 Pair Front Wheel Hub Bearings Assembly For Chevrolet Impala Equinox 2010-2017 USD 70.85 2 X Wheel Hub Bearing Assembly Front For Nissan Altima 2007 2008-2013 2.5L 5 Lug USD 63.98 Pair (2) Front Wheel Hub Bearing Fits Dodge Dakota 1997-2004 Durango 6 Bolt 2WD USD 70.65 Front Wheel Bearing Hub Assembly Fits 2006 2007 2008 2009 Chevrolet Uplander USD 45.30 Excellent Delivery New List Item Non-Retractable Tonneau Trunk Security Cargo Cover For Mazda CX-30 2020 2021-23 USD 103.87 Non-Retractable Rear Trunk Security Cargo Cover For Hyundai Kona 2018 2019-2023 USD 75.98 Tonneau Trunk Security Cargo Cover Privacy Shield Shade For Cadillac XT6 2020-23 USD 82.66 Retractable Rear Trunk Security Cargo Cover For 2022-2023 For Hyundai Tucson USD 81.05 Retractable Tonneau Trunk Security Cargo Cover For Lexus GX460 2010 2011-2022 USD 86.78

Frequently Asked Questions About Pair Fits Nissan Murano 2009 2010-2017 Front Wheel Hub Bearings Assembly W/ABS in My Website

123design.org is the best online shopping platform where you can buy Pair Fits Nissan Murano 2009 2010-2017 Front Wheel Hub Bearings Assembly W/ABS from renowned brand(s). 123design.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Pair Fits Nissan Murano 2009 2010-2017 Front Wheel Hub Bearings Assembly W/ABS on 123design.org?

THƯ VIỆN KHỔNG LỒ

CẬP NHẬT TỨC THÌ

HOTLINE 24/7

Frequently Asked Questions About Pair Fits Nissan Murano 2009 2010-2017 Front Wheel Hub Bearings Assembly W/ABS in My Website

What are the best-selling Pair Fits Nissan Murano 2009 2010-2017 Front Wheel Hub Bearings Assembly W/ABS on 123design.org?

Trả lời Hủy

THƯ VIỆN KHỔNG LỒ

CẬP NHẬT TỨC THÌ

HOTLINE 24/7

Frequently Asked Questions About Pair Fits Nissan Murano 2009 2010-2017 Front Wheel Hub Bearings Assembly W/ABS in My Website

What are the best-selling Pair Fits Nissan Murano 2009 2010-2017 Front Wheel Hub Bearings Assembly W/ABS on 123design.org?

Trả lời Hủy

Đăng nhập