$400.0 Buy It Now or Best Offer
free,30-Day Returns
Seller Store jstrsr
(2476) 100.0%,
Location: Kalispell, Montana
Ships to: US,
Item: 176437298429
All returns accepted:ReturnsNotAccepted
TaylorMade:TaylorMade
Torque:1 Degree
Shaft Type:Putter
Color:Black
new in plastic L.H Tour 3 Black Spider putter:new in plastic L.H Tour 3 Black Spider putter
Material:Graphite,Steel,Composite shaft Graphite/Carbon Fiber & steell
Item Length:43 in
Note: I have this putter which is brand new still in plastic, listed for 400.00 with the Stability Carbon shaft, which I do have in stock & is what it will come with, unless the buyer wants the Tour Polar White shaft the price will be 435.00 with a $330 NEW uncut Tour Polar White Stability shaft installed, instead for just a little more than the Carbon which lists for 220.00 by itself, or the Tour Polar White shaft installed for 435.00 under another listing, if the buyer doesn’t want the Polar White & instead, one of the other colored Tour Stability putter shafts add 35.00 dollars to this price for one of them installed as listed below, I also will install the shafts trademark 90 degrees down from the face so it does not show at address, it is shown differently for pictures only. Note: I also have this same putter in right hand available too NOTE: I’m an AuthorizedDealer for BGT Products, Bravo driver shafts, Stability putter shafts & ZNE Wedge shafts, & built many putters of all kinds, with these New BGT Stability Tour shafts in all kinds of putters. I DON’T SELL Stability DEMO shafts like some who are selling them at a reduced rate, These demo shafts are listed as not for resale as BGT has a sticker applied to the shaft, that states Not For Resale, Demo, on the Shaft. There is a reason they are listed as Not For Resale as they have many discrepancies, some not seen but there is a reason why they were removed & did not pass inspection. Up for sale for 400.00 dollars is this this brand new, a Left Handed, TaylorMade Spider Tour 3 Black with white sight line #3 short Slant Neck putter with white sight line, with a New uncut BGT Stability Carbon Composite Putter shaft installed or for 435.00 I will install the Stability Tour Polar White instead, or with any of the otherBGT Stability Tour shafts the buyer would have to add 35.00 to the 435.00 price, for the Tour Ghost Black, Tour Fire Red, Tour Cobalt Blue, Tour Special Edition Masters Pearl White, which this shaft listed for 495.00, during the Masters Tournament & is the only one I have available or I can also install the Tour Spec One full graphite that doesn’t use the short 5.5 inch tip section that is shown on the putter head, because the total length of the shaft is all Toray graphite/Carbon Fiber instead, it uses a small adapter tip that is black that allows the Tour Spec One to be installed on the short #3 slant neck post or I also have the special long shaft for building the long, Broomstick or Side Saddle putter, which would make it play at 52 inches long but I will trim it to the buyers specs & then install the new grip of the buyers choice, of several different colors of the stock TaylorMade Super Stroke Pistol GTR 1.0 grip at no cost or I also have many aftermarket putter grips in stock for an upgrade fee. The head does not have the weight ports installed, & weighs 361 grams as is, but has a small plastic fake weights glued in instead, but for 50.00 dollars , I will drill & ream & tap out the pocket to accept the two weights like the other Tour 3 Spider putters, which make the head much more flexible in allowing adjustable weights to be installed, if the buyer wants it heavier with adjustable weights, I will need to do the following above to the head for the added upgrade fee, mentioned above with any of the weights from 2-20 grams included in the 50.00 fee to fix the weight pockets, if you want it heavier than what the 2-20 gram weights will make it, let me know at the time of purchase & I will figure up the cost, & let you know, but it can be anywhere up to 500 grams if needed. I will also adjust the loft if needed or the lie, which would need to be fixed if you want this putter built into a Broom Stick/Long putter model or even an Arm Lock depending on the buyers specs if needed for free, depending on their height. This putter as mentioned can also be an Arm Lock, Counter Balanced, or Long Broomstick putter if your interested, in most cases the listing price would more because of the extra work involved, contact me to find out though before you purchase it. If the buyer wants a standard putter for 400.00 with the Carbon shaft & the head as is that doesn’t accept weights or for 435.00 with the Tour Polar White shaft installed or for 475.00 with any of the other Tour Stability shafts installed instead. All of the Stability Tour shafts shown in the listing pictures, have only 1 degree of torque whereas steel putter shafts start at around 3 degrees & go up depending on the shaft, the stock TM stepped steel shaft that came stock has 3.6 -3.7 degrees of torque, this putter can be upgraded to the KBS steel putter shafts that have 2.8-3.0 degrees of torque for 325.00 dollars if the buyer would prefer, with your choice of several new stock TM Super Stroke Pistol GTR 1.0 grips installed. These BGT shafts all have only 1 Degree of Torque, but the Carbon Stability shaft weighs 125 grams & is much larger in diameter too, whereas the Tour shafts only weigh 106 grams, so I prefer the Tour Stability shafts over the softer feeling but heavier Carbon shafts, all models are have much better dispersion, better feel & better distance control over other putter shafts, including steel, check out the torque values on other shafts below from my torque machine, when the putter shaft has high torque, they cause much wider dispersion & much harder distance control, so are you tired of to many 3 putts or more, it’s time to take your putting to a new level, with this putter & any of the BGT Stability Tour shafts or even the Stability Carbon shaft will greatly help your putting game to lower strokes & help you make more putts, this shaft setup is the very slight 29 degree toe weighted design, preferred by many Pro golfers that can be used for a straight back & straight thru stroke or a slight inside to out stroke in putts that break left tonight for left handed golfers. All of the Tour Stability & Carbon Stability shafts, except the Tour Spec One shafts use a steel tip at 5.5 inches combined with the Toray Graphite/Carbon Fiber Composite shaft, or if the buyer prefers the New Black Tour Spec One, full graphite shaft that BGT has just released, this shaft doesn’t use the short steel tip, instead it is the full length Toray Graphite & Carbon Fiber & has a small black coupler to allow this shaft to fit on the post. All of these shafts are New uncut & I will install them to the buyers length upon purchase, with the new grip mentioned above also, or I also have several other TM Super Stroke Pistol GTR 1.0 in several different color combinations, mentioned above & I also have the Tour Ghost Black Long putter shaft in stock & will use it to make this into a Broomstick, Side saddle or Long Putter up to 52 inches or longer if needed, but it will need the weights upgraded too add extra weights to get the head weight over 400 -500 grams or to whatever weight the buyer needs & I will install a new Black soft two piece Winn grip, email me for a quote to build this into one, sweet Long Putter, or for a couple other options I can build this Putter into an Arm Lock model up to 45 inches long for very tall players, using anyone of the Stability Tour Shafts mentioned above, getting the head to the correct weight is no problem at all, but will need the weight system installed at the upgrade fee, I also have many longer putter grips for an Arm Lock unit such as the XL Super Stroke at 13.75″, the XL S.S. grip at 17″, several long grips at 21 & 22 for Arm Locks just email me for a quote with the length, shaft, grip, head weight & I will send you a quote, also this putter would be a great Counter balanced unit as well, with several longer grips that have the weight port & being able to adjust the head weight to get it to the buyers specs, email me for a quote with length, shaft color, grip, head weight, butt grip weight & anything else the buyer needs for a quote too. These BGT Tour Stability putter shafts cost 330.00, so at this price it’s a very good deal & much less than what BGT charges. BUYER’S NOTE: I have a tool now, that allows me to measure the torque on putter shafts, here is what I found with it, torque measurements for various putter shafts, BGT Stability shafts indeed have only 1.0 degree, as I have measured several of them on this machine, all are as stated at 1.0 degree of torque, the KBS one piece tapered & other 1 piece tapered have 2.8 -3.0 degrees, the T/M Fluted Feel putter shafts have 3.7 degrees, KBS Stepped steel & other stepped steel putter shafts have 3.2-3.4 degrees, Odyssey Stroke Lab putter shafts have the most torque at 4.0 degrees, UST Composite putter shafts have 3.7 degrees. NOTE: This putter for 425.00 is a New still in plastic, Left Handed TaylorMade Spider Tour 3 short #3 Slant Neck model, with White sight line, with the BGT Stability Carbon shaft or for 450.00 instead the Stability Tour Polar White shaft installed or for 485.00 the putter would be installed with any of other Stability Tour models, listed above, with this the slight 29 degree toe down model, that is preferred by most Tour Pro golfers as it can be used for a straight back-straight through stroke or on putts that break from right to left a slight inside to out stroke that allows a slight draw spin imparted to the ball which makes it dive into the hole, then instead of having to change the stroke on the other side of the ball they can putt straight back & straight through, so this gives the player much more control with putting. This putter does have a sight line & the shaft is the New 330.00 BGT Stability Tour Fire Red, a Toray Graphite & Carbon Fiber putter shaft that is very popular on Tour & with better players that want to really lower their scores & handicap, as they know the putter is the most used club in the bag. These BGT shafts have very low, 1 degree torque which lowers dispersion, yet have great feel & much better distance control over traditional steel putter shafts. These shafts, except the Tour Spec One shaft, have the 8 inch tip section epoxied into the coupler, which leaves 5.5 inches protruding out, & come in 3 colors, the Black, Silver or Chrome, which allows the tip end of the shaft to epoxy onto the post & the buyer can have his choice of the other Stability Tour shafts installed instead, the, Tour Ghost Black, Tour Cobalt Blue, Tour Polar White, Tour Fire Red or also, the Tour Spec One Black shaft also installed. This short #3 slant neck shaft putter doesn’t have hardly any offset, meaning the shaft isn’t protruding in front of the face which allows for better alignment & helps make a straight back/straight thru stroke & by adding the BGT Stability shaft of the buyers choice which only have 1 degree of torque your dispersion will be greatly improved & help you lower strokes immensely off your scores. AT PRESENT I HAVE INSTALLED MANY BGT STABILITY SHAFTS IN ALL KINDS OF PUTTERS, INCLUDING EVENROLLS, SCOTTY CAMERONS, ODYSSEY, PING, BETTINARDI, RIFE, TRUE ROLL, SEE MORE & MANY OTHERS, & HAVE REPLACED SHAFTS IN 14 PGA TEACHING PRO’S PUTTERS, 8 OF THESE HAVE BEEN STROKE LAB REPLACEMENTS, THEY HAVE ALL BEEN VERY HAPPY WITH HOW MUCH BETTER THEIR PUTTING HAS IMPROVED BY GOING TO THESE SUPER PUTTER SHAFTS & THE LIST OF TOUR PLAYERS USING THEM IS GROWING DAILY, PLAYERS LIKE DUSTIN JOHNSON, ZACH JOHNSON,LOUIS OOSTHASEN, & MANY OTHERS. IT MAKES ANY PUTTER, MUCH BETTER. CHECK OUT THE TORQUE FINDINGS ON MOST PUTTER SHAFTS LISTED ABOVE. This Putter, can have the new full length BGT Stability Tour Spec One shaft option available, for $25.00 dollars extra, as the small coupler costs the extra to allow the Tour Spec One to be installed & I will still build it to the buyers specs upon purchase. I also have many other aftermarket putter grips from Super Stroke, Winn, Iomic, Golf Pride and others. IF THE BUYER PREFERS THE WEIGHT IN THE BUTT OF THE SHAFT, THEY WOULD BE BETTER SERVED TO HAVE ME INSTALL ONE OF THE SUPER STROKE GRIPS THAT HAVE THE WEIGHT PORT IN THEM, LIKE THE ONE ALREASDY INSTALLED ON THIS SHAFT THAT IS SHOWN IN THE PICTURES, or FOR AN UPGRADE FEE & TO MAKE THE PUTTER A COUNTER BALANCED PUTTER, ONE OF THE LONGER PUTTER GRIPS LIKE THE 13.75 OR 17 INCH GRIP, I WOULD NEED INSTALL ONE OF THESE GRIPS TO MAKE IT A BETTER COUNTER BALANCED PUTTER, THESE GRIPS ALLOW INSTALLING EITHER A 25G, 50G OR 75G WEIGHT IN THE BUTT, I ALSO HAVE CUSTOM MADE THESE WEIGHTS FOR OTHER PLAYERS IN 10, 15, & 20G & EVEN IN BETWEEN 25-50G, THE SHAFT SHOULD BE 1-2 INCHES LONGER & THE LONGER XL SUPER STROKE GRIP SHOULD BE INSTALLED WHICH I ALSO HAVE, WITH THIS GRIP INSTALLED, THE PLAYER CAN REMOVE THE WEIGHT VERY EASILY & CHANGE WEIGHTS, ADD 45.00 WHICH INCLUDES ONLY ONE WEIGHT. EITHER THE 25 G, 50 G OR 75 G WEIGHT, EACH OTHER ONE ADDED IS 15.00 EACH EXTRA, AND I ALSO HAVE CUSTOM MADE ONES THAT ARE LIGHTER THAN 25 GRAMS, 10, 15 & 20 Grams OR IN BETWEEN 25-50 GRAMS, I MADE ONE AT 38 GRAMS FOR MY CLUB PRO IN MONTANA, AS THE 25 G WAS TO LIGHT & THE 50 G TO HEAVY, so the 38 Gram I made him was perfect OR THERE ARE ALSO MANY OTHER AFTERMARKET GRIPS AVAILABLE, ALSO, THAT I HAVE IN STOCK, AS MENTIONED ABOVE, FROM SUPER STROKE, WINN, GOLF PRIDE, IOMIC & ETC., I CAN SEND PICTURES, OF THEM IF NEEDED JUST LET ME KNOW WHICH ONE. SO WHEN CHANGING GRIPS, GOING FROM A SMALL STOCK GRIP TO A LARGER GRIP, THE LARGER GRIP WILL WEIGH MORE, THE HEAVIER GRIP WILL CHANGE THE SWING WEIGHT ON THE PUTTER, STANDARD LENGTH PUTTER HEADS WEIGH ABOUT 350 GRAMS, SOME SLIGHTLY MORE LIKE THIS ONE, WHICH WEIGHS 361 GRAMS,SOME LESS, EVEN UNDER 350 GRAMS, LONG PUTTERS I’VE BUILT ARE ALWAYS HEAVIER FROM 400-500 GRAMS, ARM LOCK & COUNTER BALANCED ALSO NEED AT LEAST 385-400 GRAMS, ANOTHER VERY IMPORTANT THING TO CONSIDER IS TO HAVE THE CORRECT PUTTER LENGTH TO GET YOUR EYES OVER THE BALL & ON THE LINE YOU PICK WHEN STANDING BEHIND THE BALL, TO LONG OF A PUTTER WILL CAUSE THE TOE TO BE UP & NOT FLAT & YOUR EYES WILL BE WAY TO THE INSIDE OF THE INTENDED TARGET LINE. THE LONGER THE SHAFT THE HEAVIER THE SWING WEIGHT WILL BE. I will shorten or lengthen the putter length to whatever length the buyer needs at no cost or install many of the other different grips that I have in stock also, for an upgrade charge, depending on which grip is wanted by the buyer. I am a professional club fitter & install the grip exactly 90 degrees square to the face so the flat spot on the grip is aligned perfectly square with the face at address, most grip installers just eyeball this procedure & it is hit and miss, making it not square to the face, as I have corrected many that were not done correctly, making them slightly open or closed, this keeps the player from rolling the putt true on their intended line. The weight system in the grip allows the player to quiet the hands during the stroke, by adding different weights to help control the players stroke. I also have built many ARM -LOCK & the new Lean Lock putters for my customers locally here in Montana in the summer & Phoenix in the winter, & throughoutthe country, so if you have something that you would like built into an ARM LOCK, Counter Balanced, Lean Lock, Side Saddle, Broom Stick or Long putter, please let me know what your interested in & what I have, such as several different face balanced putters & even a center shafted ones as well, so please let me know & we can discuss your options. I also have these putters for sale locally so may sell this locally & end listing
Frequently Asked Questions About New L.H. Taylormade Spider Tour 3 Slant w/New Uncut BGT Stability Carbon Shaft in My Website
123design.org is the best online shopping platform where you can buy New L.H. Taylormade Spider Tour 3 Slant w/New Uncut BGT Stability Carbon Shaft from renowned brand(s). 123design.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling New L.H. Taylormade Spider Tour 3 Slant w/New Uncut BGT Stability Carbon Shaft on 123design.org?
123design.org helps you to shop online and delivers Lining to your doorstep. The best-selling Lining on 123design.org are: Auto Suede Headliner Fabric Foam Backed Easy Recover Car Roof Trunk Lining 2PCS Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 250CM Front Fender Liner & Undercover Set w/ Clips For 11-12 Altima Sedan 11-13 Coupe 32sqft Headliner Fabric Car Roof Lining DIY Replacement Repair Foam Back Auto Headliner Fabric Roof Ceiling Lining Upholstery Foam Backing Black 2PCS 3mm MGT Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 2PCS Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining DIY 3MM Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 150CM Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 24Sqft Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 150CM NEW Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 2PCS Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 2PCS 600 #2 (Poly) Airjacket Bubble Padded Envelope Mailers 8.5×12 100 % Recyclable Headliner Material Suede Fabric Foam Backing For Automotive Roof lining Replace Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 3mm Auto Headliner Fabric Roof Ceiling Lining Upholstery Foam Backing Black 40sqft Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 24Sqft Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining120”x60” Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 2PCS Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 150CM NEW Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery MGT Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 2PCS Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining DIY 3MM Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 24Sqft NEW Black Foam Backed Headliner Fabric for Car Roof Panel Lining 3mm USA 2PCS 24 Sqft Black Foam Backed Headliner Fabric for Car Roof Panel Lining 3mm 2PCS Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 150CM Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 250CM New Front Fender Liner & Engine Under Cover Set For 2015-2017 Toyota Camry NEW Black Foam Backed Headliner Fabric for Car Roof Panel Lining 24sqft 2PCS Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining DIY 3MM Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 40sqft Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 32sqft Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 2PCS Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 2PCS Black Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 98”x 60″ Auto Headliner Fabric Car Roof Ceiling Lining Upholstery Foam Backing Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 150CM Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 48 Sqft 32sqft Headliner Fabric Car Roof Lining DIY Replacement Repair Foam Back Grey 24sqft Headliner Fabric Auto Roof Lining DIY Replacement Repair Foam Back 80MIL Auto Under-felt Carpet Underlay/Trunk Lining Replace Material Upholstery 40sqft Dark gray Foam Backed Headliner Fabric for Car Roof Panel Lining 3mm USA Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 3mm 2MM Auto Under-felt Carpet Underlay/Trunk Lining Replace Material Upholstery US Automotive Suede Headliner Fabric Foam Backed Easy Recover Car Roof Lining Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 24Sqft Auto Headliner Fabric Roof Ceiling Lining Upholstery Foam Backing Light Gray 59″x79″ Headliner Material Suede Fabric Foam Backing For Automotive Roof lining Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery98”x60” Auto Headliner Fabric Car Roof Ceiling Lining Upholstery Foam Backing 80”x60” 100CMX200CM Under-felt Carpet Underlay/Trunk Lining Replace Material Upholstery High quality Headliner Fabric Auto Roof Lining DIY Replacement Repair Foam Back 3mm Auto Under-felt Carpet Underlay/Trunk Lining Replace Material Upholstery US Car Headliner Fabric Car Roof Ceiling Lining Upholstery Foam Backing 98”x60” Black 40sqft Headliner Fabric Auto Roof Lining DIY Replacement Repair Foam Back 48sqft Headliner Fabric Auto Roof Lining DIY Replacement Repair Foam Backing Auto Suede Headliner Fabric Foam Backed Easy Recover Car Roof Trunk Lining 60W 39″X79″ Auto Under-felt Carpet Underlay/Trunk Lining Replace Material Upholstery Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 150CM Automotive Suede Headliner Fabric Torn Rig Repair Lining Upholstery 120”x60” Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 2PCS NEW Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery MGT Auto Headliner Fabric Roof Ceiling Lining Upholstery Foam Backing Black 2PCS 120”x 60″ Auto Headliner Fabric Car Roof Ceiling Lining Upholstery Foam Backing Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining DIY 3MM MGT Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 2PCS MGT Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 2PCS Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining DIY 3MM Black Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 2PCS Automotive Suede Headliner Fabric Torn Rig Repair Lining Upholstery 120”x60” Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining120”x60” Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 2PCS Black Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining Auto Headliner Fabric Car Roof Ceiling Lining Upholstery Foam Backing 150CM Auto Headliner Fabric Car Roof Ceiling Lining Upholstery Foam Backing 120”x60” Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 48Sqft Black Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining Black Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining Automotive Suede Headliner Fabric Torn Rig Repair Lining Upholstery 120”x60” Auto Headliner Fabric Roof Ceiling Lining Upholstery Foam Backing Black 2PCS 3mm Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 3mm Automotive Suede Headliner Fabric Torn Rig Repair Lining Upholstery 120”x60” NEW Black Foam Backed Headliner Fabric for Car Roof Panel Lining 24sqft 2PCS NEW Black Foam Backed Headliner Fabric for Car Roof Panel Lining 3mm USA 2PCS 24 Sqft Black Foam Backed Headliner Fabric for Car Roof Panel Lining 3mm 2PCS NEW Black Foam Backed Headliner Fabric for Car Roof Panel Lining 24sqft 2PCS 24 Sqft Black Foam Backed Headliner Fabric for Car Roof Panel Lining 3mm 2PCS NEW Black Foam Backed Headliner Fabric for Car Roof Panel Lining 3mm USA 2PCS Automotive Suede Headliner Fabric Torn Rig Repair Lining Upholstery 120”x60” NEW Black Foam Backed Headliner Fabric for Car Roof Panel Lining 24sqft 2PCS 1PC Auto Headliner Fabric Car Roof Ceiling Lining Upholstery Foam Backing USA NEW Black Foam Backed Headliner Fabric for Car Roof Panel Lining 3mm USA 2PCS 24 Sqft Black Foam Backed Headliner Fabric for Car Roof Panel Lining 3mm 2PCS 98”x 60″ Auto Headliner Fabric Car Roof Ceiling Lining Upholstery Foam Backing NEW Black Foam Backed Headliner Fabric for Car Roof Panel Lining 24sqft 2PCS Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 40sqft Auto Headliner Fabric Car Roof Ceiling Lining Upholstery Foam Backing 250CM Mens Pullover Fleece Hoodie