Please note before you buy: Products as shown in my main picture, one channel price. so if you need stereo channels, please buy 2pcs. it needs to solder by yourself .thank you!
Features:

Model:JLH1969

Name: Amplifier Board

1. Double-sided , thick copper PCB.

This one is doubled-sided so the copper pad durability is

greatly enhanced by plated-through hole ( PTH) process.

2. Hermetically sealed metal casing transistors used on both small signal and power stage.

3. High quality electrolytic capacitors.

4. High quality solder with silver content is used in soldering.

5. ERO film capacitors for audio coupling.

6. Thick and heavy aluminum plates already mounted on the board

( as in the pictures) for easy to interface with heatsink.

Specification:

1.Operating voltage: DC 12V-35V (corresponding to 9-26V transformer)

2.Output sound power: approx 10-15W

3.It can be pushed 3-8 inches, 120 watts of power bookshelf box,

full-range boxes. Sensitivity to be higher than 83db.

4. Adjustable quiescent current between 0.3-1.8A,

recommended 1.2 Ann (radiators need more than 0.7 kg).

Adjust the midpoint / quiescent current method:

midpoint:

1. Select the universal table’s 10A ;,

2. black pen -GND, red lead -TP1;

3. Adjust the adjustable resistance KT1 (supply voltage 1/2)

Current:

1. Select universal table’s 10A,

2. Loosen the screws of VCC supply, pull out the wires,

3. One pen connected to the pull out wire, the other pen connected to

the screw of terminals, which is a measure of the current

(equivalent to remove the VCC line of 1969 board , replaced with an ammeter),

4. Adjust the adjustable resistor KT2 changing the current

NOTE:the 2N3055 is ST or Motorola is pre-owneded in good condition.

maybe the capacitor appearance is scratched,but all in good condition and unused.

NOTE:if you purchased 2 of this item i will send you a pair of JLH 1969(L+R Channel)if you purchased 1 pic i will send you the L or R channel random.

 
Package includes:

1pcs  JLH 1969  Amplifier  Assembled  Board 

OR

JLH 1969 Amplifier DIY Kit