6575 HUB GRAPPLER 3/4" Drive Wheel Hub and Bearing Puller Adapter Kit

$539.99 Buy It Now or Best Offer
free,30-Day Returns

Seller Store opallinternational
(3799) 99.0%,

Location: Romeoville, Illinois
Ships to: US,
Item: 393418434456

Restocking Fee:No
Return shipping will be paid by:Buyer
Returns Accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Manufacturer Part Number:YM-6575
Unbranded:Unbranded
Warranty:12 Months

FunctionThe Hub Grappler Kit, similar to OTC 6575 is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. New Hub Grappler PullerIt’s specifically designed to apply maximum force with minimal effort from an impact gun to also minimize service time. New JawsIt designed and sized to properly fit hub applications and can be quickly located on the puller bar without the use of fasteners. Nice DesignThe new 3/4” custom drive screw coupled with the special equalizer washer provides smooth operation while the proprietary heat treating extends its life 5-10 times longer than similar designs. FeatureUse our 6575 Hub Grappler Kit, it will eliminates unnecessary alignments or the use of a shop press, cutting service time dramatically. Just buy confidently with 12 months’ warranty. 6575 Hub Grappler Kit for on Vehicle Wheel Hub and Bearing Removal & InstallationThe application guide is the most comprehensive hub and bearing service guide on the market. Developed to be the first tool used in the kit, it provides quick reference to the other tools in the kit required to do the job, eliminating guesswork and saving time. Value is at the core of the tool and equipment portfolio. For a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Package ContentPackage Quantity: 52 piecesTools Material: Carbon steelSurface: Black-oxide finishStorage: Stored in a suitcaseSuitcase Material: ABS plastic FUNCTIONThis Hub Grappler Kit, similar to OTC 6575 is the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle.It can eliminate unnecessary alignments or the use of a shop press, saving you time and energy!!FEATURESSpecifically designed to apply maximum force with minimal effort from an impact gun to also minimize service time.The new jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the use of fastenersThe new 3/4″ custom drive screw coupled with the special equalizer washer provides smooth operation while the proprietary heat treating extends its life 5-10 times longer than similar designsOuter tie road removerUse on imported and domestic, front or rear wheel drive vehicle, cast or stamped-steel steering knuckles.Handles up to 5 tons of knuckle twisting force.Jaws, once tightened, won’t slip on the knuckle.Can be used to separate lower ball joints on import FWD vehicles.Easy to recognize and arrangeEach component is engraved number on it.Tools that can form different combinations are suitable for different car models, which our application guide included will be noted clearly.6 new adapters increases application coverage up to 2009 model yearEasy to save in and carry out with plastic mold suitcaseIncludes tie rod/ball joint tool and 2 Ford axle installers.Total: 52 piecesMAINLY USING INSTRUCTIONFRONT HUB REMOVALUse the wrench to hold the forcing screw nut and turn the forcing screw to press out the hub assemblyBEARING REMOVAL1. Remove the snap ring from the outboard side of the knuckle2.Use a wrench to hold the forcing screw nut and turn the forcing screw to press out the worn bearingNEW BEARING INSTALLATIONNOTE: The bearing installed must be assembled with the flat side toward the bearing and the small diameter pilot away from the bearing.1.Lightly lubricate the new bearing, and position it for installation2.Use the wrench to hold the forcing screw nut and turn the forcing screw to press the bearing into the spindle assembly until it bottoms3.Install the snap ring in the outboard side of the knuckle. PaymentWe only receive PayPal, all major credit cards are accepted through our secure payment processor PayPal.Delivery detailsThe item will be shipped within 1-2 days working day after paying, please make sure your PayPal address is correct before ordering, caused it cannot be changed once the order shipped out.Return PolicyIf you’re not 100% satisfied with your purchase from our store, simply return it for a full refund in 30 days. Please attention, all shipping charges for returned products are to be paid by the buyer. Please feel free to contact us if you have more questions with our products!About usA store focusing on auto parts. Just buy form us, make your car perfectly work for you.Contact usAny problem with our products, Please contact us via eBay using “Contact member”. We will respond within 24 hours. Thank you for your understanding.

Frequently Asked Questions About 6575 HUB GRAPPLER 3/4″ Drive Wheel Hub and Bearing Puller Adapter Kit in My Website

123design.org is the best online shopping platform where you can buy 6575 HUB GRAPPLER 3/4″ Drive Wheel Hub and Bearing Puller Adapter Kit from renowned brand(s). 123design.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 6575 HUB GRAPPLER 3/4″ Drive Wheel Hub and Bearing Puller Adapter Kit on 123design.org?

THƯ VIỆN KHỔNG LỒ

CẬP NHẬT TỨC THÌ

HOTLINE 24/7

Frequently Asked Questions About 6575 HUB GRAPPLER 3/4″ Drive Wheel Hub and Bearing Puller Adapter Kit in My Website

What are the best-selling 6575 HUB GRAPPLER 3/4″ Drive Wheel Hub and Bearing Puller Adapter Kit on 123design.org?

Trả lời Hủy

THƯ VIỆN KHỔNG LỒ

CẬP NHẬT TỨC THÌ

HOTLINE 24/7

Frequently Asked Questions About 6575 HUB GRAPPLER 3/4″ Drive Wheel Hub and Bearing Puller Adapter Kit in My Website

What are the best-selling 6575 HUB GRAPPLER 3/4″ Drive Wheel Hub and Bearing Puller Adapter Kit on 123design.org?

Trả lời Hủy

Đăng nhập