ACD-6 PRO Digital Clamp Meter 600V AC/DC, 224 x 78 x 40

$197.68 Buy It Now or Best Offer
free,30-Day Returns

Seller Store charvi004
(22) 100.0%,

Location: Eugene, Oregon
Ships to: US,
Item: 405242848900

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Size:224 x 78 x 40
EAN:0095969365888
ISBN:0095969365888
Package Dimensions LxWxH:11.61×6.18×3.19 Inches
Weight:1.1 Pounds
Type:Does not apply
Amprobe:Amprobe

The ACD-6 Pro digital clamp meter is an average-sensing, auto- or manual-ranging multimeter for measuring current, voltage, capacitance, and resistance in electrical testing applications. It has a transformer clamp that measures alternating current (AC) to 1,000 amp. The meter comes with detachable test leads that measure direct current (DC) voltage and AC voltage to 600 volts (V), capacitance to 3,000 microfarads, and resistance to 40 megaohms. The clamp has two jaws that can close around an electrical conductor up to 1.77″ (45 mm) in diameter to measure current without touching or interrupting the circuit. A relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing for quick comparison of multiple readings. The maximum reading mode displays the highest reading in a session to track a sudden increase in measurements. An audible continuity sensor confirms that the circuit conducts electricity, and the diode test detects whether a circuit’s diodes are working properly. The hold function keeps the reading on the display, even after the meter is disconnected. The unit automatically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter’s batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock. This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter will be in auto-ranging mode and will automatically select the correct operating range for the property being measured. It can be switched to manual-ranging mode, which requires that the operator choose the appropriate operating range. The meter has a 4,000-count resolution, meaning that it can display up to 3,999 units (3-3/4 digits) before the operating range needs to be changed. The meter meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V, which covers items used with enclosed building circuit installations (service panel parts, branch circuits, and fixed installations that are connected directly to a building’s AC power supply). The unit comes with a soft vinyl carrying case. Specifications Maximum alternating current (AC) input1,000 ampMaximum AC voltage input600 volts (V)Maximum direct current (DC) voltage input600VMaximum resistance detected40 megaohmsMaximum capacitance detected3,000 microfaradsPower supply3V IEC-CR2032 coin battery (one, installed)Standards met and certificationsEuropean Normal (EN); International Electrotechnical Commission (IEC) and EN safety standard 61010-1; European Conformity (CE); Underwriters Laboratories (UL)Weight0.5 lb./220 gMeter dimensions8.8 x 3.1 x 1.6 inches/224 x 78 x 40 mm (H x W x D) H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Clamp meters (also called clamp-on meters) measure electrical current without cutting through wires or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp meters diagnose problems in electrical equipment, wiring, and power supplies. The meter’s current clamp has two jaws that fit around a conductor to take measurements. All clamp meters test for current. Some come with test leads and inputs for measuring voltage, capacitance, and resistance. They display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages determine meter choice. Safety ratings are Digital clamp meter measures alternating current (AC) to 1,000 amp, direct current (DC) voltage and AC voltage to 600 volts (V), capacitance to 3,000 microfarads, and resistance to 40 megaohms Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform Transformer clamp with 1.77″ (45 mm) jaw opening measures current without touching or interrupting the circuit A relative zero mode stores a reading in memory to use as a zero point for subsequent readings Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category III installations up to 600V

Frequently Asked Questions About ACD-6 PRO Digital Clamp Meter 600V AC/DC, 224 x 78 x 40 in My Website

123design.org is the best online shopping platform where you can buy ACD-6 PRO Digital Clamp Meter 600V AC/DC, 224 x 78 x 40 from renowned brand(s). 123design.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling ACD-6 PRO Digital Clamp Meter 600V AC/DC, 224 x 78 x 40 on 123design.org?

THƯ VIỆN KHỔNG LỒ

CẬP NHẬT TỨC THÌ

HOTLINE 24/7

Frequently Asked Questions About ACD-6 PRO Digital Clamp Meter 600V AC/DC, 224 x 78 x 40 in My Website

What are the best-selling ACD-6 PRO Digital Clamp Meter 600V AC/DC, 224 x 78 x 40 on 123design.org?

Trả lời Hủy

THƯ VIỆN KHỔNG LỒ

CẬP NHẬT TỨC THÌ

HOTLINE 24/7

Frequently Asked Questions About ACD-6 PRO Digital Clamp Meter 600V AC/DC, 224 x 78 x 40 in My Website

What are the best-selling ACD-6 PRO Digital Clamp Meter 600V AC/DC, 224 x 78 x 40 on 123design.org?

Trả lời Hủy

Đăng nhập