$56.04 Buy It Now or Best Offer
free,30-Day Returns

Seller Store topcn-autoparts
(184944) 99.0%,

Location: Ontario, California, United States
Ships to: US,
Item: 312692710992

Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
Placement on Vehicle:Front, Left, Right, Upper, Lower
Type:Tie Rod Linkage
Universal Fitment:No
Custom Bundle:Yes
Interchange Part Number:ES3492T EV370 K6539 K6540
OE/OEM Part Number:Suspension Steering Tie Rod Ends Linkages Assembly,Ball Joints
Bundle Description:Tie Rod End,Ball Joint,Ball Joint
Superseded Part Number:Front Driver and Passenger Side Replacement
Manufacturer Warranty:10 Year
topcn-autoparts:topcn-autoparts
UPC:Does Not Apply
Manufacturer Part Number:TA81055801P
Adjustable:Yes
Greasable or Sealed:Greasable
Kit Included:8 Pieces
Surface Finish:Premium Quality
Cross Part Number:1999 2000 2001 2002 2003 2004 2005 2006 2007
Suspension Grade:Standard
Fitment:For Chevrolet Silverado 1500 GMC Sierra 1500 Classic
Features:Greasable
Finish:Coated
Material:Alloy Steel
Mounting Style:Bolt-On
Cotter Pin Hole:Yes

eBay 1.Fit For Chevrolet Silverado 1500 4.3L 1999-2006 Chevrolet Silverado 1500 4.8L 1999-2006 Chevrolet Silverado 1500 5.3L 1999-2006 Chevrolet Silverado 1500 6.0L 2003-2006 Chevrolet Silverado 1500 Classic 4.3L 2007 Chevrolet Silverado 1500 Classic 4.8L 2007 Chevrolet Silverado 1500 Classic 5.3L 2007 Chevrolet Silverado 1500 Classic 6.0L 2007 GMC Sierra 1500 4.3L 1999-2006 GMC Sierra 1500 4.8L 1999-2006 GMC Sierra 1500 5.3L 1999-2006 GMC Sierra 1500 6.0L 2001-2006 GMC Sierra 1500 Classic 4.3L 2007 GMC Sierra 1500 Classic 4.8L 2007 GMC Sierra 1500 Classic 5.3L 2007 GMC Sierra 1500 Classic 6.0L 2007 2.Package Includes: 8x Front Tie Rod Ends Upper Lower Ball Joints For 99-06 Chevy Silverado 1500 2WD 1.Fit For Chevrolet Silverado 1500 4.3L 1999-2006 Chevrolet Silverado 1500 4.8L 1999-2006 Chevrolet Silverado 1500 5.3L 1999-2006 Chevrolet Silverado 1500 6.0L 2003-2006 Chevrolet Silverado 1500 Classic 4.3L 2007 Chevrolet Silverado 1500 Classic 4.8L 2007 Chevrolet Silverado 1500 Classic 5.3L 2007 Chevrolet Silverado 1500 Classic 6.0L 2007 GMC Sierra 1500 4.3L 1999-2006 GMC Sierra 1500 4.8L 1999-2006 GMC Sierra 1500 5.3L 1999-2006 GMC Sierra 1500 6.0L 2001-2006 GMC Sierra 1500 Classic 4.3L 2007 GMC Sierra 1500 Classic 4.8L 2007 GMC Sierra 1500 Classic 5.3L 2007 GMC Sierra 1500 Classic 6.0L 2007 2.Package Includes: 2x Part# Front Outer Tie Rods Ends Links – ES3492T 2x Part# Front Inner Tie Rods Ends Links – EV370 2x Part# Front Suspension Lower Ball Joints – K6539 2x Part# Front Suspension Upper Ball Joints – K6540 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may “wander” as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Placement on Vehicle : Front Type : Tie Rod Linkage Universal Fitment : No Custom Bundle : Yes Interchange Part Number : ES3492T EV370 K6539 K6540 OE/OEM Part Number : Suspension Steering Tie Rod Ends Linkages Assembly,Ball Joints Bundle Description : Tie Rod End,Ball Joint,Ball Joint Superseded Part Number : Front Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : topcn-autoparts UPC : Does Not Apply Manufacturer Part Number : TA81055801P Adjustable : Yes Greasable or Sealed : Greasable Kit Included : 8 Pieces Surface Finish : Premium Quality Cross Part Number : 1999 2000 2001 2002 2003 2004 2005 2006 2007 Suspension Grade : Standard Fitment : For Chevrolet Silverado 1500 GMC Sierra 1500 Classic Suspension Grade : Standard Fitment : For Chevrolet Silverado 1500 GMC Sierra 1500 Classic Fitment : For Chevrolet Silverado 1500 GMC Sierra 1500 Classic Features : Greasable Finish : Coated Material : Alloy Steel Mounting Style : Bolt-On Cotter Pin Hole : Yes Discount Targeted Discounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means Topcn-autoparts won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Topcn-autoparts has the final power of interpretation of all the above Targeted Discount Terms and Procedures. Shipping WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Warranty Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).Topcn-autoparts carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).Topcn-autoparts promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise Topcn-autoparts has the right to refuse any replacement requests. (5).Topcn-autoparts promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise Topcn-autoparts has the right to refuse any replacement requests. (6).Topcn-autoparts carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).Topcn-autoparts has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. Return (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Best Sales 2x Front Hood Lift Supports Shocks Struts For Dodge Ram 1500 2500 3500 4500 5500 USD 14.79 2x Front Hood Gas Lift Supports Struts Shocks Springs For Dodge Ram 02-10 4364 USD 18.69 Pair Front Wheel Bearings For Chevrolet Impala Buick Pontiac Grand Prix Montana USD 62.35 2 X Front/Rear Wheel Hub Bearing For Buick LaCrosse Century Chevy Impala Venture USD 63.53 2 for Dodge Challenger 2008 2009 2010 2011 2012 2013 2014 Keyless Remote Key Fob USD 22.88 Newly Listed Rack 280 Steering Rack & Pinion Assembly For Dodge Ram 1500 2002 – 2005 4X4 USD 245.00 251A Power Steering Rack Gear For Mazda B2500 1999-2001 Ford Ranger 1998-2000 USD 260.99 Brand Driveshaft Propshaft 2211Mm For Mercedes Viano Vito Bus W639 6394103206 USD 417.78 Drive Shaft Bearing For 2001-2006 Santa Fe Gls Sport Utility 4-Door 2.7L 3.5L USD 25.58 Bugflector Dark Smoke Hood Shield For 1995-2000 Toyota Tacoma USD 69.49 Terms & Contact Shipping Policy Payment Policy Return Policy FAQ About Us 8x Front Tie Rod Ends Upper Lower Ball Joints For 99-06 Chevy Silverado 1500 2WD 1.Fit For Chevrolet Silverado 1500 4.3L 1999-2006 Chevrolet Silverado 1500 4.8L 1999-2006 Chevrolet Silverado 1500 5.3L 1999-2006 Chevrolet Silverado 1500 6.0L 2003-2006 Chevrolet Silverado 1500 Classic 4.3L 2007 Chevrolet Silverado 1500 Classic 4.8L 2007 Chevrolet Silverado 1500 Classic 5.3L 2007 Chevrolet Silverado 1500 Classic 6.0L 2007 GMC Sierra 1500 4.3L 1999-2006 GMC Sierra 1500 4.8L 1999-2006 GMC Sierra 1500 5.3L 1999-2006 GMC Sierra 1500 6.0L 2001-2006 GMC Sierra 1500 Classic 4.3L 2007 GMC Sierra 1500 Classic 4.8L 2007 GMC Sierra 1500 Classic 5.3L 2007 GMC Sierra 1500 Classic 6.0L 2007 2.Package Includes: 2x Part# Front Outer Tie Rods Ends Links – ES3492T 2x Part# Front Inner Tie Rods Ends Links – EV370 2x Part# Front Suspension Lower Ball Joints – K6539 2x Part# Front Suspension Upper Ball Joints – K6540 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Ball Joint Replacement Guideline: If there is a knocking or clunking noise in the area of the front axle when the car is traveling over road bumps, potholes or curbs, then there is usually a defect in a component of the wheel suspension. Picture(A) The side of the front axle from which the (vibration) noise is emanating can already be determined during a test drive. The type of noise also already provides certain indications for maintenance regarding which components might be faulty. Picture(B) 1.Raise the vehicle and remove the front wheels. 2.To loosen the fastening screws and fixing nuts of the compression ball joint more easily, spray them with rust remover and allow to act for a few minutes. Picture(C) 3.Loosen the fastening screws of the broken ball joint on the control arm and remove the nuts. Picture(D) 4.Loosen and remove the fixing nut of the ball joint on the steering knuckle. Tip:If the ball stud rotates, hold the ball stud in place with a hexagon socket. Picture(E) 5.Remove the bad or worn ball joint from the control arm. 6.Loosen the compression ball joint on the steering knuckle using a suitable special tool. Picture(F) 7.Clean the cone connection. Tip:For better sealing and durability of the ball joint sleeve, a little silicone grease can be applied to the contact surface. Picture(G) 8.Insert new compression ball joint in the control arm and steering knuckle and tighten with new fixing nuts. 9.Reinstall front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. 10.Measure the chassis and adjust it using the various holes on the compression ball joint if necessary. 11.Finally, carry out a test drive. Sway Bar Stabilizer Link Replacement Guideline: While driving, the following signs may indicate a faulty sway bar stabilizer link: (1).Rattling and thumping noises on rough roads. (2).Imprecise vehicle handling. (3).Stronger inclination of the vehicle during cornering. If the sway bar stabilizer link is found to be defective, it should be replaced as described below. Picture(A) 1.Raise vehicle and remove front wheels. Tip:Always check both stabilizer links and replace them in pairs if necessary. 2.Spray fastening nuts of the stabilizer link with rust remover and let act for a few minutes. Picture(B) 3.Loosen the lower fastening nut of the stabilizer link at the stabilizer and remove. Tip:If the ball stud also starts to turn, hold it with a suitable tool. 4.Press stabilizer link out of torsion bar. Picture(C) 5.Loosen the upper fastening nut of the stabilizer link at the suspension strut and remove it. Tip:If the ball stud also starts to turn, hold it with a suitable tool. Picture(D) 6.Press stabilizer link at suspension strut out of bracket. Picture(E) 7.Insert new stabilizer link at suspension strut. Picture(F) 8.Tighten stabilizer link at suspension strut to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(G) 9.Insert new stabilizer link at stabilizer. 10.Tighten stabilizer link at stabilizer to the tightening torque specified by the vehicle manufacturer. Tip:Secure the ball stud against twisting with a suitable tool. Picture(H) 11.Remount the front wheels. Lower the vehicle and tighten the wheel studs to the tightening torque specified by the vehicle manufacturer. Tip:Even if replacing the stabilizer link does not directly affect the chassis setting, we recommend checking the axle setting and adjusting if necessary after working on the suspension. 12.Conclude with a test drive. Tie-Rod End Replacement Guideline: If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely. This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod. Picture(A) Note: Cleanliness is extremely important when working on the power steering. Incorrect work and contamination can lead to leakage and, in the worst case, to failure of the steering assistance. 1.Lift the vehicle and dismount the front axle wheels. 2.Spray the fastening nut of the tie rod end with rust remover and leave it on for a few minutes. Picture(B) 3.Dismount the front underride guard. Picture(C) 4.Loosen the fastening nut from the tie rod and remove it completely. 5.Remove the tie rod end from the steering knuckle using an appropriate ball joint separator. Picture(D) 6.Remove the clamp of the bellow on the steering gear. 7.Push the bellow towards the tie rod end. Picture(E) 8.Unscrew the inner tie rod from the rack. 9.Clean the sealing face of the bellow at the steering gear. Picture(F) 10.Clean the lug of the rubber contact surface of the ball joint in the steering knuckle. Note:Always use new self-locking nuts and bolts for a reliable repair. 11.Screw the new inner tie rod into the rack and tighten it with the tightening torque that has been specified by the vehicle manufacturer. Picture(G) 12.Mount the bellow and close the clamps with the appropriate special tool. Note:Incorrect mounting of the bellow can lead to corrosion of the rack: the steering gear starts leaking which can lead to a failure in the steering assistance. Picture(H) 13.Secure the ball joint in the steering knuckle and mount the nut. Please observe the tightening torque suggested by the vehicle manufacturer. Note:During mounting, the ball stud should not turn within the ball joint. This can cause damage inside the ball joint and can lead to early failure. Tip:Secure the ball stud against twisting with a suitable tool. Picture(I) 14.Mount the front underride guard. 15.Mount the front wheels and tighten them with the tightening torque recommended by the vehicle manufacturer. 16.Align the wheels and adjust them if necessary. Observe the vehicle manufacturer specifications. 17.Perform a test drive. Note:When performing the test drive, pay special attention to the handling while cornering and listen for possible noise emission. Frequently Asked Questions (1).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (2).What happens if a ball joint breaks? When a ball joint breaks, you will hear a mysterious noise inside your car wheel. Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control. If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious. Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car. (3).What happens if I don’t replace ball joints? If you don’t want to replace your ball joints, then get ready to experience some serious issues. The old ball joints cause mysterious clunking noise or drifting steering. Once they are worn-out, it will seriously affect your steering and suspension. However, you do not need to change the ball joints if it is new. (4).Do I need to grease new ball joints? I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card. (5).Why should I get my tie rods inspected on a regular basis? If you don’t get your tie rods inspected on a regular basis, there are some warning signs to watch (and listen) for. If your vehicle pulls to one side while driving, or when braking, it’s possible that bad tie rods may be the culprit. Your vehicle’s tires will also show uneven wear on the inside and outside edge of the tire when there’s a tire rod issue. However, one of the most noticeable signs of tie rods going bad will be a knocking sound coming from the front end of the vehicle when you turn into a parking space, or some other low speed, tight turning situation. (6).Vibrations One of the first symptoms that your tie rods are damaged or breaking is that the steering wheel will vibrate slightly. This is especially prevalent when you are speeding up or turning. This happens because the steering wheel is losing its control over the tires, causing the steering wheel to shimmy as you drive. (7).Shaking As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom. (8).Wandering If your tie rods continue to go unchecked or unfixed, the rods can completely break. This can cause you to lose all control of your car, possibly resulting in an accident. When this occurs, the car will may “wander” as you drive. At this point, the steering wheel will have no control over the tires and the tires will start moving independently, causing the car to drift while you are driving. If this happens while you are on a freeway or busy road, you and others could be at serious risk of an accident. If you experience wandering, stop your car, call a tow truck and take your car to the nearest mechanic. (9).What are the symptoms of a bad sway bar? Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns. (10).What happens when a sway bar breaks? Because a sway bar helps the car’s suspension to put more pressure on loaded springs, a broken sway bar means that the car’s suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds. Item Specifics Placement on Vehicle : Front Type : Tie Rod Linkage Universal Fitment : No Custom Bundle : Yes Interchange Part Number : ES3492T EV370 K6539 K6540 OE/OEM Part Number : Suspension Steering Tie Rod Ends Linkages Assembly,Ball Joints Bundle Description : Tie Rod End,Ball Joint,Ball Joint Superseded Part Number : Front Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : topcn-autoparts UPC : Does Not Apply Manufacturer Part Number : TA81055801P Adjustable : Yes Greasable or Sealed : Greasable Kit Included : 8 Pieces Surface Finish : Premium Quality Cross Part Number : 1999 2000 2001 2002 2003 2004 2005 2006 2007 Suspension Grade : Standard Fitment : For Chevrolet Silverado 1500 GMC Sierra 1500 Classic Suspension Grade : Standard Fitment : For Chevrolet Silverado 1500 GMC Sierra 1500 Classic Fitment : For Chevrolet Silverado 1500 GMC Sierra 1500 Classic Features : Greasable Finish : Coated Material : Alloy Steel Mounting Style : Bolt-On Cotter Pin Hole : Yes DiscountShippingWarrantyReturnFeedback Targeted Discounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means Topcn-autoparts won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Topcn-autoparts has the final power of interpretation of all the above Targeted Discount Terms and Procedures. WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).Topcn-autoparts carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).Topcn-autoparts promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise Topcn-autoparts has the right to refuse any replacement requests. (5).Topcn-autoparts promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise Topcn-autoparts has the right to refuse any replacement requests. (6).Topcn-autoparts carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).Topcn-autoparts has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Copyright of Topcn-autoparts. All rights reserved.

Frequently Asked Questions About 8x Front Tie Rod Ends Upper Lower Ball Joints For 99-06 Chevy Silverado 1500 2WD in My Website

123design.org is the best online shopping platform where you can buy 8x Front Tie Rod Ends Upper Lower Ball Joints For 99-06 Chevy Silverado 1500 2WD from renowned brand(s). 123design.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 8x Front Tie Rod Ends Upper Lower Ball Joints For 99-06 Chevy Silverado 1500 2WD on 123design.org?

123design.org helps you to shop online and delivers Lining to your doorstep. The best-selling Lining on 123design.org are: Auto Suede Headliner Fabric Foam Backed Easy Recover Car Roof Trunk Lining 2PCS Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 250CM Front Fender Liner & Undercover Set w/ Clips For 11-12 Altima Sedan 11-13 Coupe 32sqft Headliner Fabric Car Roof Lining DIY Replacement Repair Foam Back Auto Headliner Fabric Roof Ceiling Lining Upholstery Foam Backing Black 2PCS 3mm MGT Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 2PCS Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining DIY 3MM Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 150CM Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 24Sqft Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 150CM NEW Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 2PCS Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 2PCS 600 #2 (Poly) Airjacket Bubble Padded Envelope Mailers 8.5×12 100 % Recyclable Headliner Material Suede Fabric Foam Backing For Automotive Roof lining Replace Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 3mm Auto Headliner Fabric Roof Ceiling Lining Upholstery Foam Backing Black 40sqft Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 24Sqft Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining120”x60” Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 2PCS Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 150CM NEW Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery MGT Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 2PCS Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining DIY 3MM Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 24Sqft NEW Black Foam Backed Headliner Fabric for Car Roof Panel Lining 3mm USA 2PCS 24 Sqft Black Foam Backed Headliner Fabric for Car Roof Panel Lining 3mm 2PCS Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 150CM Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 250CM New Front Fender Liner & Engine Under Cover Set For 2015-2017 Toyota Camry NEW Black Foam Backed Headliner Fabric for Car Roof Panel Lining 24sqft 2PCS Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining DIY 3MM Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 40sqft Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 32sqft Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 2PCS Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 2PCS Black Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 98”x 60″ Auto Headliner Fabric Car Roof Ceiling Lining Upholstery Foam Backing Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 150CM Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 48 Sqft 32sqft Headliner Fabric Car Roof Lining DIY Replacement Repair Foam Back Grey 24sqft Headliner Fabric Auto Roof Lining DIY Replacement Repair Foam Back 80MIL Auto Under-felt Carpet Underlay/Trunk Lining Replace Material Upholstery 40sqft Dark gray Foam Backed Headliner Fabric for Car Roof Panel Lining 3mm USA Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 3mm 2MM Auto Under-felt Carpet Underlay/Trunk Lining Replace Material Upholstery US Automotive Suede Headliner Fabric Foam Backed Easy Recover Car Roof Lining Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 24Sqft Auto Headliner Fabric Roof Ceiling Lining Upholstery Foam Backing Light Gray 59″x79″ Headliner Material Suede Fabric Foam Backing For Automotive Roof lining Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery98”x60” Auto Headliner Fabric Car Roof Ceiling Lining Upholstery Foam Backing 80”x60” 100CMX200CM Under-felt Carpet Underlay/Trunk Lining Replace Material Upholstery High quality Headliner Fabric Auto Roof Lining DIY Replacement Repair Foam Back 3mm Auto Under-felt Carpet Underlay/Trunk Lining Replace Material Upholstery US Car Headliner Fabric Car Roof Ceiling Lining Upholstery Foam Backing 98”x60” Black 40sqft Headliner Fabric Auto Roof Lining DIY Replacement Repair Foam Back 48sqft Headliner Fabric Auto Roof Lining DIY Replacement Repair Foam Backing Auto Suede Headliner Fabric Foam Backed Easy Recover Car Roof Trunk Lining 60W 39″X79″ Auto Under-felt Carpet Underlay/Trunk Lining Replace Material Upholstery Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 150CM Automotive Suede Headliner Fabric Torn Rig Repair Lining Upholstery 120”x60” Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 2PCS NEW Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery MGT Auto Headliner Fabric Roof Ceiling Lining Upholstery Foam Backing Black 2PCS 120”x 60″ Auto Headliner Fabric Car Roof Ceiling Lining Upholstery Foam Backing Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining DIY 3MM MGT Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 2PCS MGT Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 2PCS Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining DIY 3MM Black Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining Automotive Suede Headliner Fabric Sag Torn Rig Repair Lining Upholstery 2PCS Automotive Suede Headliner Fabric Torn Rig Repair Lining Upholstery 120”x60” Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining120”x60” Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 2PCS Black Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining Auto Headliner Fabric Car Roof Ceiling Lining Upholstery Foam Backing 150CM Auto Headliner Fabric Car Roof Ceiling Lining Upholstery Foam Backing 120”x60” Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 48Sqft Black Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining Black Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining Automotive Suede Headliner Fabric Torn Rig Repair Lining Upholstery 120”x60” Auto Headliner Fabric Roof Ceiling Lining Upholstery Foam Backing Black 2PCS 3mm Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 3mm Automotive Suede Headliner Fabric Torn Rig Repair Lining Upholstery 120”x60” NEW Black Foam Backed Headliner Fabric for Car Roof Panel Lining 24sqft 2PCS NEW Black Foam Backed Headliner Fabric for Car Roof Panel Lining 3mm USA 2PCS 24 Sqft Black Foam Backed Headliner Fabric for Car Roof Panel Lining 3mm 2PCS NEW Black Foam Backed Headliner Fabric for Car Roof Panel Lining 24sqft 2PCS 24 Sqft Black Foam Backed Headliner Fabric for Car Roof Panel Lining 3mm 2PCS NEW Black Foam Backed Headliner Fabric for Car Roof Panel Lining 3mm USA 2PCS Automotive Suede Headliner Fabric Torn Rig Repair Lining Upholstery 120”x60” NEW Black Foam Backed Headliner Fabric for Car Roof Panel Lining 24sqft 2PCS 1PC Auto Headliner Fabric Car Roof Ceiling Lining Upholstery Foam Backing USA NEW Black Foam Backed Headliner Fabric for Car Roof Panel Lining 3mm USA 2PCS 24 Sqft Black Foam Backed Headliner Fabric for Car Roof Panel Lining 3mm 2PCS 98”x 60″ Auto Headliner Fabric Car Roof Ceiling Lining Upholstery Foam Backing NEW Black Foam Backed Headliner Fabric for Car Roof Panel Lining 24sqft 2PCS Auto Suede Headliner Fabric Foam Backed Easy Recover Roof Trunk Lining 40sqft Auto Headliner Fabric Car Roof Ceiling Lining Upholstery Foam Backing 250CM Mens Pullover Fleece Hoodie