8mm Boron Spot Weld drill bit cutter used in Dent Fix, Spitznagel and other USA

$60.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store spotweldcutters
(11980) 100.0%,

Location: Saint Petersburg, Florida
Ships to: US,
Item: 386735063177

All returns accepted:ReturnsNotAccepted
Country/Region of Manufacture:United States
MPN:Does Not Apply
usa:usa

“MUST READ” this entire description as this is a very special spot weld cutter not designed for everyday use. It is designed to cut the hardest Boron steels, but is very brittle and they break very easily. They are very expensive and come with no warranty from the manufacturer. They are only to be used in Spitznagel or similar generic drill made for spot weld cutting, you also need to control the rpm’s to 1000. If you don’t have one of the specialty spot weld drill (very expensive $500) I also sell one of these style cutters that works in a more common drill, this is not that listing. This listing is for 1 new 8 mm Carbide Boron brand Spot Weld cutters. Made in the USA. Some car makers are starting to put very, very, very hard Boron steel in there automobiles. Normal spot weld cutters will not, will not, will not cut these steels. Even this bit can break when trying to cut these steels. This bit is not the one bit to cut all steels. On normal steels you should use the other more common spot weld cutters. In the rare cases that you run into the hard Boron steel, and you must drill it, such as for reusing certain panels. This is the bit for the job. The best thing to do with boron steel where you can is to grind the welds to cut them. We understand that some welds must be drilled. Again these bits are the only ones able to do these hardest steels. They are very, very, very expensive, and can break easily, but at times, necessary to get a very difficult job done. These are the best money can buy. They are made for the Spitznagel/ Dent Fix Spot Weld Cutter drills and most of the Generic clones, including Astro and Blue Point Spot weld drills. But you must control the rpm’s keeping them low. It is multi layer coated to add strength to the bit, and 3 fluted. With Spitznagel drills, always check your C-clamps replacable cup. Be sure it is in good shape. As they loss shape, they can cause these expensive bits to break. I sell these as well, they are not expensive and now would be a good time to purchase to save your bits and save on shipping. Due to the nature of drilling these super hard steels, there are no warranties on them. There are many things that factor into the life of these bits, our 100 percent satifaction guarantee is this on this cutter, if once you recieve the cutter, you on your inspection are unhappy with it, we will allow it returned for refund only if unused. We specialize in selling cutting products to Body Shops. We sell only High Quality tested products. READ READ READ Spitznagel Boron bit information sheet: “The boron steel drill bits is currently the only solution to drill through boron steel. This bit is designed for use in the DF-15 Spot Annihilator. The bit is extremely brittle, Yet tough enough for Boron Steel. It must be started flat against the metal. Let the C-clamp come back into the metal. Do not let the drill bit impact the metal. Do not start the drill bit at an angel, you increase the odds of breaking off a flute. Audi Germany tested the bit. Under the perfect conditions, with the drill bit started against the metal, Audi got 104 boron welds. On a second test they got 110. Each time they stopped the test because they felt it was enough. Mercedes in Montvale and BMW in Oxnard both use this bit in their training classes. They report about 24 Welds removed per bit. You may get one, you may get 50. You must be carefull. This is not an everyday bit. It is for boron steel only. This is a tungsten carbide drill bit. Currently only available in 8 mm. Slower the RPM to better. This drill bit carries no warranty.” To visit my ebay store click here. You can also use the links to the left to go directly to my store categories. There you can purchase many high quality Body Shop cutting products.

Frequently Asked Questions About 8mm Boron Spot Weld drill bit cutter used in Dent Fix, Spitznagel and other USA in My Website

123design.org is the best online shopping platform where you can buy 8mm Boron Spot Weld drill bit cutter used in Dent Fix, Spitznagel and other USA from renowned brand(s). 123design.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 8mm Boron Spot Weld drill bit cutter used in Dent Fix, Spitznagel and other USA on 123design.org?

THƯ VIỆN KHỔNG LỒ

CẬP NHẬT TỨC THÌ

HOTLINE 24/7

Frequently Asked Questions About 8mm Boron Spot Weld drill bit cutter used in Dent Fix, Spitznagel and other USA in My Website

What are the best-selling 8mm Boron Spot Weld drill bit cutter used in Dent Fix, Spitznagel and other USA on 123design.org?

Trả lời Hủy

THƯ VIỆN KHỔNG LỒ

CẬP NHẬT TỨC THÌ

HOTLINE 24/7

Frequently Asked Questions About 8mm Boron Spot Weld drill bit cutter used in Dent Fix, Spitznagel and other USA in My Website

What are the best-selling 8mm Boron Spot Weld drill bit cutter used in Dent Fix, Spitznagel and other USA on 123design.org?

Trả lời Hủy

Đăng nhập