New! ● 3/4" Premium Flat Drive Belt ● For All South Bend Lathe 9" & 10K Models

$64.95 Buy It Now or Best Offer
free,30-Day Returns

Seller Store stevewb
(11751) 99.8%,

Location: Durham, North Carolina
Ships to: US,
Item: 164492928812

Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back

Premium Nylon Core Flat Drive Belts for all 9″ and 10k South Bend LatheSee Measuring Guide in Photos Above! If you are currently using the old style leather drive belt for your South Bend Lathe and are tired of it slipping, breaking or if you are sick of listening to it go click, click, click from the alligator fastener contacting the pulley as it is running, then you will be pleased to know that we are now offering a premium US made, industrial quality drive belt specifically made for your lathe. The belt has a textured SBR rubber face on both sided of the belt and is reinforced by overlapping nylon fabric belts sandwiched in the center to prevent stretching and breakage. These belts are typically used on higher horsepower machinery for motor to drive power transmission and are a great alternative for vintage machinery that uses a flat belt between the drive unit and the spindle. The belt DOES NOT require you to remove the spindle on your horizontal drive lathe as you would with an endless belt and it is perfectly suited for all underneath drive lathes where a spliced belt is required. The instructions for determining your belt length are included in two easy steps as outlined in the photos above. Use the “MPN” drop-down menu above to select the belt length of your choice. Our premium quality belt is sized to your specification (Measure and select your length above) and the the joining surfaces are skived (tapered) on our precision German-made Siegling belt skiving machine. This machine produces a perfectly tapered overlapping joint which provides maximum glue surface. The long taper produces a joint of superior strength and flexibility. All materials and step-by-step instructions are included so that there is no guess work. The only thing you will need to provide is the clamping fixture for gluing which can be made easily from two small aluminum plates or bar stock and 3 small 1 inch “C” clamps. Illustrations are provided in the manual. Suggested for the fixture: 2 pieces of aluminum 2″ wide x 0.125″ thick x 5″ long and a small scrap of aluminum to provide a stop at the edge of the clamp. Please note that these belts are all 0.75″ wide and are sized for the 9″ and 10K (Light Ten) lathes only. If you have a model 10L or 10R (often called a Heavy Ten) then you will need a 1.0″ wide belt and you can find those listed separately in our ebay store. Wider belts for the larger 13″ to 16″ lathes are also coming soon. If for some reason you don’t see the belt length you require or if you have trouble measuring for your belt length, please contact us. We are always happy to help. Additional Note: We have heard from several buyers that their lathes have a 1″ wide belt and they want to know why we only sell 3/4″ wide belts for this application. For a 9″ south bend lathe, the correct factory-specified belt width is 3/4″ wide. We realize that over time many belts have been replaced with a 1″ belt because that matches the width of the pulleys which is not correct. In order for the belt to run true on the pulley crowns, (they are not flat and have a curved surface as you may notice) it must have some small margin on either side of the belt, otherwise if the belt does not track perfectly on the pulley when running, it may rub the sides of the stepped pulley or the belt guard. This contact will rob power to the spindle and it will cause the belt to wear prematurely if not corrected. We highly recommend running the 3/4″ width on your 9″ lathe as we have done for many years on our 9″ lathes because we believe you will be happier with the long-term result. If for whatever reason you still require a 1″ belt, we will be happy to make a custom one for you (but the larger belt does cost more). We ultimately would like for you to be satisfied with your purchase either way so please contact us BEFORE purchase if you require a custom belt not listed above.Included In The Drive Belt Kit1 SBR green rubber-faced, nylon core flat drive belt (You select the length above). The belt will arrive with both ends fully prepared and ready to join.2 Vials of specially formulated cement (1- Rubber Cement, 1- Nylon Cement)2 Disposable Glue Brushes1 Alcohol Wipe for cleaning joint prior to gluing.1 Set of completely illustrated, step-by-step instructions Transaction InformationFree Shipping by USPS to any US address address.We cannot ship overseas due to the adhesives included in the kit. If you have any questions, please don’t hesitate to contact us. We will be happy to answer.Thanks for your consideration.Disclaimer: ILION Industrial Services, LLC is neither affiliated with South Bend Lathe, Inc nor successor companies and makes no claims as such. Any information or product offered through this manual is done so in good faith in order to assist vintage machinery owners and is not sanctioned by South Bend Lathe, Inc. as OEM information, parts or products. ILION Industrial Services, LLC makes no warranty and accepts no liability for injury, property damage or any other costs incurred and/or damages suffered (including direct, indirect or consequential damage or damages, as well as loss of income or profits) as a result of the use of any information or product contained or referenced herein. By the purchase and/or use of the information or products referenced in this document, the user expressly accepts these terms and conditions.

Frequently Asked Questions About New! ● 3/4″ Premium Flat Drive Belt ● For All South Bend Lathe 9″ & 10K Models in My Website

123design.org is the best online shopping platform where you can buy New! ● 3/4″ Premium Flat Drive Belt ● For All South Bend Lathe 9″ & 10K Models from renowned brand(s). 123design.org delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling New! ● 3/4″ Premium Flat Drive Belt ● For All South Bend Lathe 9″ & 10K Models on 123design.org?

THƯ VIỆN KHỔNG LỒ

CẬP NHẬT TỨC THÌ

HOTLINE 24/7

Frequently Asked Questions About New! ● 3/4″ Premium Flat Drive Belt ● For All South Bend Lathe 9″ & 10K Models in My Website

What are the best-selling New! ● 3/4″ Premium Flat Drive Belt ● For All South Bend Lathe 9″ & 10K Models on 123design.org?

Trả lời Hủy

THƯ VIỆN KHỔNG LỒ

CẬP NHẬT TỨC THÌ

HOTLINE 24/7

Frequently Asked Questions About New! ● 3/4″ Premium Flat Drive Belt ● For All South Bend Lathe 9″ & 10K Models in My Website

What are the best-selling New! ● 3/4″ Premium Flat Drive Belt ● For All South Bend Lathe 9″ & 10K Models on 123design.org?

Trả lời Hủy

Đăng nhập